Home ExpertiseProjectsWho we work withAboutContact Discuss a project 0740 555 0606
  1. Home
  2. Expertise
  3. Steel detailing

Tekla Structures · fabrication packages

Steel detailing and fabrication drawings

We model steelwork in Tekla Structures and produce the fabrication information steel fabricators need — general arrangement and fabrication drawings, IFC models and NC files — for projects across London and the South East. The service is also offered through Steelable Designs, our specialist steel design and detailing brand.

Selsdon Way, Canary Wharf — 3D model of the balcony steelwork
Selsdon Way, Canary Wharf — Tekla model of the balcony steelwork

When you need it

  • A fabricator needs a fabrication package from the engineer’s design
  • The geometry is complex — curved plans, cantilevers or exposed architectural steel
  • Repeated elements such as balconies need consistent, revision-tracked details
  • Design and fabrication information should come from one model

What you receive

  • 3D steelwork model in Tekla Structures
  • General arrangement drawings
  • Assembly and part fabrication drawings
  • IFC models for coordination
  • NC files for CNC fabrication
  • Revisions as the design develops

What’s included in your appointment

What is included is confirmed in writing for each appointment. Typically:

  • Connection design is a separate engineering scope — detailing uses the connection design supplied, or appointed with us
  • Erection method statements are not included
  • Material procurement remains with the fabricator

What to send for a quote

Send any drawings, photographs or project details you have. We’ll let you know if we need anything else.

  • Structural and architectural drawings or models
  • Connection design or design forces
  • Your drawing standards and title block
  • Required outputs — drawings, IFC, NC files — and programme

How it works

  1. 01

    Enquiry

    An engineer reviews your information and discusses the project with you.

  2. 02

    Proposal

    We confirm what is included and our fee in writing before work starts.

  3. 03

    Modelling and drawing checks

    We prepare the steelwork model and fabrication drawings, then check them against the agreed design information before issue.

  4. 04

    Issue and queries

    We issue the drawings and model files and respond to technical queries.

Relevant projects

Steel detailing in practice.

What we were appointed to do on each project, the problem we addressed and the result.

London E14Multi-Storey Residential

Selsdon Way, Canary Wharf

Challenge
Torsion at the balcony fronts, repeated over many levels while the architecture was still changing.
CES scope
Steel and connection design, fabrication drawings, IFC model and NC files.
Outcome
Revisions carried through one model, keeping fabrication information consistent as the design evolved.
Appointed by
ATM Steel
Read the case study
London EC1Airspace Development

Saffron Hill

Challenge
Fabrication information for a new frame built above an existing building.
CES scope
Full 3D model, fabrication drawings and connection design.
Outcome
Manufacturing information reviewed by the architect and structural engineer before fabrication.
Appointed by
All Steels All Designs (steel fabricator)
Read the case study
Bexhill-on-Sea, East SussexResidential New Build

Bexhill

Challenge
A curved plan and extensive glazing demanded close control of the steel geometry.
CES scope
Structural design, steel frame design and fabrication drawings.
Outcome
Produced directly from the 3D model, providing the drawings and model data needed for manufacture.
Appointed by
Private homeowner
Read the case study

Also: Chapter Westminster, Deal, Clerkenwell, Tower Close, 21 Rymer Street.

Questions

Which software do you use?

Tekla Structures. We issue drawings, IFC models and NC files from the model.

Do you also design the connections?

We can. Connection design is a separate scope and is often appointed alongside detailing so the design and the fabrication information come from one team.

How are design changes handled?

Changes are made in the model and reissued as revised drawings, so the fabrication information stays aligned with the current design — as on Selsdon Way, where revisions were carried through the model as the architecture developed.

Can you work to our drawing standards?

Tell us your title block, numbering and drawing conventions at the start and we will set up the drawings to match.

What is Steelable Designs?

Steelable Designs is the CES brand for specialist steel design and detailing services for fabricators and contractors.

Start a project

Need steel fabrication drawings?

Send the structural drawings, available connection details, required outputs and programme. We’ll confirm the detailing scope and provide a quote.

Request a detailing quote